5. Fields and parameters are as described in
Disabling FCIP tunnels
1. From the FCIP Tunnels dialog box, select the tunnel you want to disable.
2. Select Disable Tunnel.
3. Click OK to disable the tunnel.
Enabling FCIP tunnels
1. From the FCIP Tunnels dialog box, select the tunnel you want to enable.
2. Select Enable Tunnel.
3. Click OK to enable the tunnel.
DCFM Enterprise User Manual
53-1001775-01
FIGURE 166
Edit FCIP Circuits dialog box
fields and parameters.
A confirmation dialog box displays, warning you that when you delete a tunnel, you delete all
associated FCIP circuits.
A confirmation dialog box displays.
Disabling FCIP tunnels
"Adding an FCIP
circuit". You can edit all editable
16
407