Fwclassinit - Brocade Communications Systems Brocade 8/12c Command Reference Manual

22

fwClassInit

fwClassInit
Initializes all classes under Fabric Watch.
SYNOPSIS
fwclassinit
DESCRIPTION
Use this command to initialize all classes under Fabric Watch. The command should only be used after
installing a Fabric Watch license to start licensed Fabric Watch classes. Refer to the Fabric Watch
Administrator's Guide for a list of supported Fabric Watch classes.
NOTES
This command requires a Fabric Watch license.
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
None
EXAMPLES
To initialize all classes under Fabric Watch:
SEE ALSO
fwConfigReload, fwHelp, portFencing, portThConfig, thConfig,
390
switch:admin> fwclassinit
fwClassInit: Fabric Watch is updating...
fwClassInit: Fabric Watch has been updated.
sysMonitor
Fabric OS Command Reference
53-1001764-01