Brocade Communications Systems Brocade 8/12c Command Reference Manual page 23

•
•
•
Encryption
Updates to cryptoCfg command to support the following new functionality:
•
•
•
Fabric Services
•
•
•
•
•
Fabric Watch
Updates to the following help pages:
•
•
•
•
•
Fabric OS Command Reference
53-1002147-01
portLedTest - The --slot option must be specified with the -port option on bladed systems.
bpPortLoopbackTest - New spd_mode 16 for 16G platforms.
PortLoopbackTest - New spd_mode 10 and 16 for 10G and 16G platforms.
cryptocfg --reclaimWWN - Support for moving an encryption switch or blade to another encryption
group and reclaiming the WWN.
cryptocfg --kvdiag - Provides an interface for key vault diagnostics.
cryptocfg --show -mkexported_keyids - Lists exported master keys.
The following commands have been enhanced to display Diagnostic D_Port information for
inter-switch link testing:
-
fabPortShow
-
fabricLog
-
portCfgShow
-
portShow
-
switchShow
fabricLog - Added descriptions of port states and switch states.
Support for Fabric Name:
-
switchShow - Displays Fabric Name if configured.
-
FabricShow -Displays Fabric Name if configured.
Support FCP probing on NPIV devices.
-
fcpProbeShow - Display the probing information for NPIV devices.
-
configure - New configuration parameter "Allow NPIV Probing".
Support for user-defined port name:
-
portName - Sets default port name up to 128 characters long.
-
Use the configure command to disable the feature.
-
The portShow command displays the port name.
-
configure - New option to disable assignment of a default port name:
SwitchStatusPolicySet - Support for Missing SFP and Error Port policies.
SwitchStatusPolicyShow - Support for Missing SFP and Error Port policies.
SwitchStatusShow - Support for Missing SFP and Error Port policies.
sfpShow - Enhanced to support the following new displays:
-
New -health operand displays Fabric Watch information for 10G/16G SFPs and 16G QSFPs.
-
Tracks fabric watch state transitions for these new SFPs.
-
Speed unit changed to Gbps (from MB/S).
-
New field displays power on time in years/hours.
fwFruConfig - Support for SFP State Change configuration (no. longer done with thConfig).
xxiii