Brocade Communications Systems Brocade 8/12c Command Reference Manual page 22

Access Gateway
•
•
•
Advanced Performance Monitoring (APM).
•
•
•
Deprecated legacy monitors and commands, removed filter support from remaining performance monitor
commands.
Bottleneck Monitoring
New options to the bottleneckMon command to configure sub-second thresholds:
•
•
Buffer Credit Loss Detection and Recovery
The bottleNeckMon command has been enhanced to configure and display credit loss detection and
recovery tools.
•
•
QoS
•
•
Diagnostics
Support new 16G platforms:
xxii
New options to support static F_Port mapping:
-
ag --staticadd N_Port [F_Port1; F_Port2;...]
-
ag --staticdel N_Port [F_Port1; F_Port2;...]
New options to configure reliability counters:
-
ag --reliabilitycounterset
-
ag --reliabilitycountershow
agShow - Displays additional Access Gateway F-Port information if both switches run Fabric OS
v7.0.0
perfTTmon - updated for Condor 3 platforms. Now supports Top Talkers on E_Ports,
On Condor 3 platforms, EE monitors are supported on F_Ports and E_Ports.
-
perfAddEEMonitor
-
perfDelEEMonitor
-
perfMonitorShow
perfResourceShow - The -fPortRes operand has been changed to -portttRes.
bottleneckMon --config -lsubsectimethresh time_threshold
bottleneckMon --config -lsubsecsevthresh severity_threshold
bottleneckMon --cfgcredittools
bottleneckMon --showcredittools
Support for CS_CTL-based traffic prioritization.
-
portCfgQoS - --enable | --disable [slot/]port[-port] csctl_mode
-
portCfgShow - displays CSCTL mode:ONN or OFF.
Update for new platforms:
-
portCfgQoS - Updated rate limit values for new platforms: 9000, 10000, 11000, 12000, 13000,
14000, 15000, 16000.
Fabric OS Command Reference
53-1002147-01