Errclear - Brocade Communications Systems Brocade 8/12c Command Reference Manual

2

errClear

errClear
Clears all error log messages for all switch instances on this control processor (CP).
Synopsis errclear
Description Use this command to clear all internal and external error log messages for all switch instances on
the CP where the command is executed. For products with a single processor, all error log
messages are cleared. For products that contain multiple processors, this command can be
executed on either control processor. It clears the error log only on the CP where the command is
executed, for example, to clear the error log on the standby CP, issue errclear on the standby CP.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands none
Examples To clear the error log messages:
See Also errDump, errShow
220
switch:admin> errclear
Fabric OS Command Reference
53-1001764-01