Pull Roller Manual Nip Adjustment - GBC F - 160 Operation And Maintenance Manual

Operations
k) You may now begin mounting from the front
operating position.
5.5.2 Pull roller manual nip
adjustment
INFORMATION
If the main laminating rollers are heated,
mounting application may be run from the
rear operating position of the machine.
a) Turn the MAIN POWER to the "ON"
position.
b) Press RESET. The front control panel will
illuminated.
Page 5 - 20
Power
Reset
F - 160 Operation and Maintenance Manual
c) Press SEL.
0
J O B
Flashing
d) Press FWD for a forward motor direction.
00.0
S P E E D
S A F E T Y
e) Bring the footswitch around to the rear of the
laminator.
Caution should always be exercised
when using the laminator with
the safety shields raised.
You can be seriously HURT or INJURED!
© GBC Pro - Tech August 1999
S A V
S E L
S H U T D O W N
=
F W R
G O
REV.
S T O P
WARNING