GBC F - 160 Operation And Maintenance Manual page 131

Applications
v) Press SPEED
comfortable working with. It is recommended
that SPEED not exceed 9 ft./ min.
( 2.74 m/ min. ) .
9.0
S P E E D
S A F E T Y
w) Press GO.
9.0
S P E E D
S A F E T Y
x) Feed the images through the main rollers from
the front operating position of the laminator.
y) After the last print has passed through the pull
rollers, press STOP.
9.0
S P E E D
S A F E T Y
Page 6 - 42
to a speed you feel
F W R
G O
R E V .
S T O P
F W R
G O
R E V
.
S T O P
F W R
G O
R E V .
S T O P
F - 160 Operation and Maintenance Manual
z) Press GAP to a 1 in. setting.
G A P
1
Finishing
a) With an enclosed blade, cut the finished product
from the web.
Do not use an open blade to cut
the web near the rollers.
You can put cuts into the rollers!
b) The decals are now ready to be trimmed.
c) If you used the lower rewind, remove the
rewind tube and bring it to a trimming station.
Replace the rewind tube when finished.
d) Raise the front and rear safety shields to the up
position.
© GBC Pro - Tech August 1999
P R E S S U R E
CAUTION