Control Panel - GBC F - 160 Operation And Maintenance Manual

Installation
4.8.1

Control panel

a) Press TOP TEMP.
o
( 48 C ). TOP TEMP DISPLAY begins
flashing.
S L E E P
T O P T E M P .
120
b) Press BOT TEMP
o
( 48 C ). BOT TEMP DISPLAY begins
flashing.
S L E E P
T O P T E M P .
120
c) Press GAP once. GAP DISPLAY
decreases 1/16th of an inch per press. The
upper main roller moves accordingly. Once to
"0", the upper main roller is contacting the
lower main roller.
G A P
1 - 0
Page 4 - 18
to a value of 120 o F
B O T . T E M P
68
o
to a value of 120 F
B O T . T E M P
120
P R E S S U R E
F - 160 Operation and Maintenance Manual
d) Press GAP . GAP DISPLAY increases
1/16th of an inch per press. The upper main roll
moves accordingly. Once to "1", the upper
main roller stops.
G A P
0 - 1
e) Press and hold PRESSURE
main roller travels in a constant downward
motion. Once making contact with the lower
main roller, the bars turn solid one at a time until
all 10 bars are solid.
G A P
0
f) Press and hold PRESSURE s. The upper main
roller travels in a constant upward motion. The
pressure bars turn hollow one at a time until no
bars are solid and GAP DISPLAY changes to
"1" then stops.
G A P
1
© GBC Pro - Tech August 1999
P R E S S U R E
. The upper
P R E S S U R E
P R E S S U R E