GBC F - 160 Operation And Maintenance Manual page 43

Installation
The laminator requires 230 to 240 vac, 50/60
Hz, 55 amps. Or, in Europe only, 3-N phase,
220 vac, 32 amps per phase.
Be sure to follow the correct wiring diagram
when supplying power to the laminator. If
improperly connected, you can be seriously
injured or cause damage to the laminator.
Figure 4.1.2 illustrates proper wiring for single phase
for the U.S..
Figure 4.1.3 illustrates proper wiring for Wye 3 phase
for Europe.
The Falcon 160 Laminator is a large and
heavy piece of equipment. It is necessary to
e m p l o y L I C E N S E D R I G G E R S O N L Y t o
move the laminator. The laminator is not
designed to be tipped up or sideways in any
way. Such action disturbs the exact
alignment of the rolling parts of the machine
and requires extensive realignment. You can
be crushed or seriously injured.
Page 4 - 2
WARNING
WARNING
F - 160 Operation and Maintenance Manual
© GBC Pro - Tech August 1999