GBC F - 160 Operation And Maintenance Manual page 172

F - 160 Operation and Maintenance Manual
Figure 6.8.11 Draping the decal
Decal
Release liner
Substrate
j) Make sure the image is conformed to the upper
main roller. Refer to Figure 6.8.12
INFORMATION
If the image is not conformed to the roller,
you may experience difficulties with
this application.
Figure 6.8.12 Conformed print
Conformed
© GBC Pro - Tech August 1999
U p p e r
pull
roll
Upper
pull
roll
When operating the laminator using the
variable speed footswitch, keep hands and
fingers away from the nip of the rollers.
Y o u m a y b e C R U S H E D o r B U R N E D !
- If its not, slowly move the substrate into the
nip until the decal is conformed. Refer to
Figure 6.8.13
Speed is controlled through the variable
speed footswitch when the safety shield
is in the raised position.
Figure 6.8.13 Non conformed decal
Not conformed
Applications
WARNING
CAUTION
Upper
pull
roll
Page 6 - 83