Table of Contents
Advertisement
F - 160 Operation and Maintenance Manual
u) Press on the variable speed footswitch while
guiding the leader board into the nip to confirm
that the board is secure.
Speed is controlled through the variable
speed footswitch when the safety shield
is in the raised position.
Keep hands and fingers clear of
the laminator roller nip when
adjusting PRESSURE.
You can be CRUSHED or BURNED!
v) If the board is loose, press PRESSURE
adjust the gap between the main rollers.
G A P
1/4
INFORMATION
Excessive pressure will cause the
substrate to bow or flatten.
© GBC Pro - Tech August 1999
CAUTION
WARNING
P R E S S U R E
w) Press STOP.
00.0
S P E E D
S A F E T Y
x) Press REV
motor.
00.0
S P E E D
S A F E T Y
to
When operating the laminator through the
variable speed footswitch, keep your hands
away from the nip of the rollers. You may
be crushed or burned.
y) Press on the variable speed footswitch to back
the board out of the main rollers.
Applications
F W R
G O
R E V .
S T O P
to reverse the direction of the
F W R
G O
R E V .
S T O P
WARNING
Page 6 - 55
Advertisement
Table of Contents
