GBC F - 160 Operation And Maintenance Manual page 119

Applications
k) Press GAP to enter a 0 in. gap setting.
G A P
0
l) Press FWD
00.0
S P E E D
S A F E T Y
INFORMATION
Steps " m " and " n " will be performed
simultaneously.
m) Use a piece of cardboard to push the material
into the nip of the main rollers.
When operating the laminator using the
variable speed footswitch, keep hands and
fingers away from the nip of the rollers.
Y o u m a y b e C R U S H E D o r B U R N E D !
Page 6 - 30
P R E S S U R E
F W R
G O
R E V .
S T O P
WARNING
F - 160 Operation and Maintenance Manual
n) Press on the variable speed footswitch to guide
the cardboard, craft paper and laminate through
the main rollers.
Speed is controlled through the variable
speed footswitch when the safety shield
is in the raised position.
Keep hands and fingers clear of
the laminator roller nip when
adjusting PRESSURE.
You can be CRUSHED or BURNED!
o) When the cardboard has travel pass the main
rollers, press PRESSURE
of 60 - 80%.
G A P
0
Excess pressure can damage the laminating
rollers. Always use the minimum roll
pressure necessary to complete the task.
© GBC Pro - Tech August 1999
CAUTION
WARNING
to set a pressure
P R E S S U R E
CAUTION