GBC F - 160 Operation And Maintenance Manual page 33

Safety
Speed is controlled through the variable
speed footswitch when the safety shield
is in the raised position.
Use only isopropyl alcohol or rubber cement
eraser to clean the rollers. Harsh chemicals
like toluene, acetone, or MEK can destroy
the silicone covering of the rolls.
Exercise care when cleaning the laminating
rollers with 80% isopropyl alcohol:
Use only in a well ventilated area
Wear rubber gloves
Use only on cool rolls
C L E A N I N G H E A T E D R O L L E R S C A N
I G N I T E T H E F U M E S !
Keep hands and fingers clear of the
laminator roller nip when changing GAP.
You can be CRUSHED or BURNED!
Page 1 - 18
CAUTION
CAUTION
CAUTION
WARNING
F - 160 Operation and Maintenance Manual
Keep hands and fingers clear of
the laminator roller nip when
adjusting PRESSURE.
You can be CRUSHED or BURNED!
ELECTRICAL
Remove power from the laminator before
cleaning. You can be severely shocked,
electrocuted or cause a fire.
ELECTRICAL
Do not use liquid or aerosol cleaners on the
laminator. Do not spill liquid of any kind on
the laminator. You can be severely shocked,
electrocuted or cause a fire. Use only a damp
cloth for cleaning unless other wise
specified.
© GBC Pro - Tech August 1999
WARNING
S H O C K
S H O C K