Table of Contents
Advertisement
F - 160 Operation and Maintenance Manual
INFORMATION
Below is a recommended maintenance
schedule. Before performing any of the steps
listed, read through the procedures first.
Please follow the instructions pertaining to
the step you are performing.
Remove power from the laminator before
servicing. You can be severely shocked,
electrocuted or cause a fire.
INFORMATION
If improperly performed, you may
encounter other problems with the output
quality.
Caution should always be exercised
when using the laminator with
the safety shields raised.
You can be seriously HURT or INJURED!
© GBC Pro - Tech August 1999
ELECTRICAL
S H O C K
WARNING
CAUTION
Excessive pressure can destroy the silicone
layer by pressing to hard or scrubbing
too long in one spot.
CAUTION
Do NOT pick or pull heat activated adhesive
off the rolls when they are cold. You can
cause irreparable damage to the
laminating rolls.
INFORMATION
When cleaning the bottom main roller,
switch the motion direction to reverse.
When cleaning the bottom pull roller,
switch the motion direction to forward.
This will prevent anything from
being pulled into the nip.
WARNING
When operating the laminator using the
variable speed footswitch, keep hands and
fingers away from the nip of the rollers.
Y o u m a y b e C R U S H E D o r B U R N E D !
Safety
Page 1 - 17
Advertisement
Table of Contents
