Table of Contents
Advertisement
F - 160 Operation and Maintenance Manual
e) Press on the variable speed footswitch while
guiding the leader board into the nip to confirm
that the board is secure.
Speed is controlled through the variable
speed footswitch when the safety shield
is in the raised position.
Keep hands and fingers clear of
the laminator roller nip when
adjusting PRESSURE.
You can be CRUSHED or BURNED!
f) If the board is loose, press PRESSURE
adjust the gap between the main rollers.
G A P
1/4
Excess pressure can damage the laminating
rollers. Always use the minimum roll
pressure necessary to complete the task.
© GBC Pro - Tech August 1999
CAUTION
WARNING
P R E S S U R E
CAUTION
Excessive pressure will cause the
substrate to bow or flatten.
g) Press STOP.
00.0
S P E E D
S A F E T Y
h) Press REV
motor.
to
00.0
S P E E D
S A F E T Y
When operating the laminator using the
variable speed footswitch, keep hands and
fingers away from the nip of the rollers.
Y o u m a y b e C R U S H E D o r B U R N E D !
Applications
INFORMATION
F W R
G O
R E V .
S T O P
to reverse the direction of the
F W R
G O
R E V .
S T O P
WARNING
Page 6 - 45
Advertisement
Table of Contents
