Table of Contents
Advertisement
F - 160 Operation and Maintenance Manual
Be sure to follow the correct wiring diagram
when supplying power to the laminator. If
improperly connected, you can be seriously
injured or cause damage to the laminator.
INFORMATION
A L L S H I P M E N T S A R E E X - W O R K S . At our
dock, title passes to the buyer. Please review
your insurance coverage prior to shipment,
as you are responsible for all subsequent
freight charges and risks.
INFORMATION
Before signing the Bill of Lading, you should
be sure to inspect the crate and / or pallet
for signs of damage or missing items; if
applicable, make note of this on the Bill of
Lading.
INFORMATION
Depending on the destination and customer
preference, the Falcon 160 may be shipped
in various ways. The laminator may arrive
shrink wrapped or in a plywood crate on a
skid. Please follow the unpacking procedure
that pertains to your method of shipment.
© GBC Pro - Tech August 1999
WARNING
WARNING
The unpacking process requires at least two
people. You can be severely injured, crushed
or cause damage to the laminator.
CAUTION
Do not use a knife or other sharp object to
remove the shrink wrap from around the
laminator. You can cause irreparable
damage to the rollers.
WARNING
Do not attempt to move the laminator across
anything other than a flat level surface
without trained and qualified riggers. You
can be crushed or seriously injured.
CAUTION
Do not allow the top to fall into the crate. It
can damage the laminator.
Safety
Page 1 - 5
Advertisement
Table of Contents
