GBC F - 160 Operation And Maintenance Manual page 97

Applications
Caution should always be exercised
when using a knife .
Sharp knife can cut you!
Caution should always be exercised when
using a utility knife near the rollers.
You can put cuts into the rollers!
k) Inform the second person of the last board to
be precoated before feeding the trailer board
into the main roller nip. Refer to Figure 6.1.5
INFORMATION
Before stopping the rollers, position the pull
rollers up. This will prevent an impression
in the last pre-coated board.
l) The second person will raise the rear pull roller
by turning the crank handle counterclockwise
until separated.
Page 6 - 8
CAUTION
CAUTION
F - 160 Operation and Maintenance Manual
Figure 6.1.5 Trailer board
Precoated
board
m) Stop the laminator when the trailer board is in
the main roller nip. Refer to Figure 6.1.5
INFORMATION
Do not stop in the middle of a board, an
impression of the roller footprint will be
evident on the board. This can cause a
tunnel effect in the mounting process.
n) Trim any excess mount adhesive from the
boards.
Caution should always be exercised
when using a knife .
Sharp knife can cut you!
© GBC Pro - Tech August 1999
Trailer
board
CAUTION