GBC F - 160 Operation And Maintenance Manual page 28

F - 160 Operation and Maintenance Manual
Ensure the roll of mount adhesive is
loaded properly on the unwind shaft.
Exposed adhesive should be
facing away from the rollers.
This will prevent hours of roll cleaning!
Keep hands and fingers clear of the
laminator roller nip when changing GAP.
You can be CRUSHED or BURNED!
INFORMATION
If the thickness of the substrate is not
known, follow the procedure to manually
set the nip in Section 5.5.1 Manually nip
adjustment.
Keep hands and fingers clear of
the laminator roller nip when
adjusting PRESSURE.
You can be CRUSHED or BURNED!
© GBC Pro - Tech August 1999
CAUTION
WARNING
WARNING
WARNING
When operating the laminator using the
variable speed footswitch, keep hands and
fingers away from the nip of the rollers.
Y o u m a y b e C R U S H E D o r B U R N E D !
CAUTION
Speed is controlled through the variable
speed footswitch when the safety shield
is in the raised position.
INFORMATION
Excessive pressure will cause the
substrate to bow or flatten.
CAUTION
Excess pressure can damage the laminating
rollers. Always use the minimum roll
pressure necessary to complete the task.
Safety
Page 1 - 13