GBC F - 160 Operation And Maintenance Manual page 69

Operations
( 15 ) JOB : When pressed once will increase the
job number in JOB DISPLAY by increments of 1. If
pressed and held, the JOB DISPLAY will increase to
9 at which point it will stop.
J O B
5
( 16 ) JOB : When pressed once will decrease the
job number in JOB DISPLAY by increments of 1. If
pressed and held, the JOB DISPLAY will decrease to
0 at which point it will stop.
J O B 5
( 17 )SEL : When pressed will send the operating
parameters for the stored job number selected to the
correct devices. Any time JOB
pressed, SEL will flash indicating a change in job
number.
5
J O B
Page 5 - 4
15
S E L S A V
S H U T D O W N
S E L S A V
S H U T D O W N
16
or JOB is
17
S E L S A V
S H U T D O W N
F - 160 Operation and Maintenance Manual
( 18 ) SAVE : When pressed, will save the current
settings for the number showing in the JOB DISPLAY.
For more information, refer to Section 5.4 Job
Programming on how to save parameters.
J O B
5
( 19 ) SHUTDOWN : When pressed, automatically
raises the main roller gap setting to 1 in., turns the top
and bottom temperature controller units off and stops
the drive motor. The LCD on the control panel remains
illuminated and the SLEEP indicator will be solid.
J O B 5
( 20 ) SPEED DISPLAY : Displays the current speed
setting of the laminator.
6.5
S P E E D
S A F E T Y
© GBC Pro - Tech August 1999
18
S E L S A V
S H U T D O W N
S E L S A V
S H U T D O W N
19
20
F W R
G O
R E V .
S T O P