Table of Contents
Advertisement
F - 160 Operation and Maintenance Manual
m) Make sure the image is conformed to the upper
main roller. Refer to Figure 6.5.13
INFORMATION
If the image is not conformed to the roller,
you may experience difficulties with
this application.
Figure 6.5.13 Conformed print
Upper
Main
Roll
When operating the laminator using the
variable speed footswitch, keep hands and
fingers away from the nip of the rollers.
Y o u m a y b e C R U S H E D o r B U R N E D !
- If its not, slowly move the substrate into the
nip until the decal is conformed. Refer to
Figure 6.5.14
© GBC Pro - Tech August 1999
Conformed
WARNING
Speed is controlled through the variable
speed footswitch when the safety shield
is in the raised position.
Figure 6.5.14 Non conformed decal
Upper
Main
Roll
INFORMATION
Steps " n " and " o " will be performed
simultaneously.
When operating the laminator using the
variable speed footswitch, keep hands and
fingers away from the nip of the rollers.
Y o u m a y b e C R U S H E D o r B U R N E D !
n) Press down on the variable speed footswitch
just enough to give yourself a comfortable work
speed.
Applications
CAUTION
Not conformed
WARNING
Page 6 - 49
Advertisement
Table of Contents
