GBC F - 160 Operation And Maintenance Manual page 163

Applications
Figure 6.8.3 Laminate
Remove
d) Apply just enough brake tension to prevent the
roll of mount adhesive from free spinning.
INFORMATION
Excessive brake tension may cause the
output to curl. This can create complications
with the second pass of this application.
e) Pull the mount adhesive up towards the upper
main roller and tack it the laminate resting on
the upper main roller. Refer to Figure 6.8.4
INFORMATION
The mount adhesive will adhere to the
activated adhesive from the laminate.
Page 6 - 74
F - 160 Operation and Maintenance Manual
Figure 6.8.4 Mount adhesive
Thermal
laminate
Thermal
laminate
f) Use a piece of cardboard to push the material
variable speed footswitch, keep hands and
g) Press on the variable speed footswitch to guide
into the nip of the main rollers.
WARNING
When operating the laminator using the
fingers away from the nip of the rollers.
Y o u m a y b e C R U S H E D o r B U R N E D !
the cardboard, mount adhesive and laminate
through the main rollers.
© GBC Pro - Tech August 1999
Mount
adhesive