GBC F - 160 Operation And Maintenance Manual page 100

F - 160 Operation and Maintenance Manual
e) Press SEL. SEL will stop flashing.
0
J O B
Keep hands and fingers clear of the
laminator roller nip when changing GAP.
You can be CRUSHED or BURNED!
f) Press GAP to the required gap setting for
the substrate being used. The GAP DISPLAY
should reflect your desired setting.
G A P
1/4
g) Press FWD .
00.0
S P E E D
S A F E T Y
© GBC Pro - Tech August 1999
S E L S A V
S H U T D O W N
WARNING
P R E S S U R E
F W R
G O
REV.
S T O P
WARNING
When operating the laminator using the
variable speed footswitch, keep hands and
fingers away from the nip of the rollers.
Y o u m a y b e C R U S H E D o r B U R N E D !
h) Press on the variable speed footswitch while
guiding the leader board into the nip to confirm
that the board is secure.
CAUTION
Speed is controlled through the variable
speed footswitch when the safety shield
is in the raised position.
WARNING
Keep hands and fingers clear of
the laminator roller nip when
adjusting PRESSURE.
You can be CRUSHED or BURNED!
i) If the board is loose, press PRESSURE
adjust the gap between the main rollers.
G A P
1/4
Applications
to
P R E S S U R E
Page 6 - 11