Displaying Error Statistics - Dell PowerConnect B-RX Configuration Manual

TABLE 138
This field...
Level-1 Hellos
Level-2 Hellos
Level-1 LSP
Level-2 LSP
Level-1 CSNP
Level-2 CSNP
Level-1 PSNP
Level-2 PSNP

Displaying error statistics

To display IS-IS error statistics, enter the following command at any level of the CLI.
BigIron RX# show isis counts
Area Mismatch: 0
Max Area Mismatch: 0
System ID Length Mismatch: 0
Authentication Fail: 0
Corrupted LSP: 0
LSP Sequence Number Skipped: 0
LSP Max Sequence Number Exceeded: 0
Level-1 Database Overload: 0
Level-2 Database Overload: 0
Our LSP Purged: 0
Syntax: show isis counts
This display shows the following information.
TABLE 139
This field...
Area Mismatch
Max Area Mismatch
System ID Length Mismatch
Authentication Fail
Corrupted LSP
BigIron RX Series Configuration Guide
53-1001986-01
IS-IS traffic statistics
Displays...
The number of Level-1 hello PDUs sent and received by the device.
The number of Level-2 hello PDUs sent and received by the device.
The number of Level-1 link-state PDUs sent and received by the device.
The number of Level-2 link-state PDUs sent and received by the device.
The number of Level-1 Complete Sequence Number PDUs (CSNPs) sent
and received by the device.
The number of Level-2 CSNPs sent and received by the device.
The number of Level-1 Partial Sequence Number PDUs (PSNPs) sent
and received by the device.
The number of Level-2 PSNPs sent and received by the device.
IS-IS error statistics
Displays...
The number of times the device interface was unable to create a Level-1
adjacency with a neighbor because the device interface and the
neighbor did not have any areas in common.
The number of times the device received a PDU whose value for
maximum number of area addresses did not match the device's value
for maximum number of area addresses.
The number of times the device received a PDU whose ID field was a
different length than the ID field length configured on the device.
The device is configured to authenticate IS-IS packets in the packet's
domain or area, but the packet did not contain the correct password.
The number of times the device detected a corrupted LSP in the device's
memory.
Displaying IPv4 IS-IS information
28
891