Dell PowerConnect B-RX Configuration Manual page 580

19
Displaying traffic reduction
BigIron RX(config)# show rate-limit
interface e 1/1
rate-limit input 499321856 750000000
interface e 1/3
rate-limit input vlan-id 10 499321856 750000000
rate-limit input vlan-id 20 97523712 200000000
To display bytes forwarded and dropped, enter the following command.
BigIron RX(config)# show rate-limit counters
interface e 1/1
rate-limit input 499321856 750000000
Bytes fwd: 440 Bytes drop: 20 Total: 460
interface e 1/3
rate-limit input vlan-id 10 499321856 750000000
Bytes fwd: 0 Bytes drop: 0 Total: 0
rate-limit input vlan-id 20 97523712 200000000
Bytes fwd: 0 Bytes drop: 0 Total: 0
The byte count includes the preamble and the minimum inter-frame gap in Ethernet.
To display rate limiting policies for an interface that includes counters, enter the following
command.
BigIron RX(config)# show rate-limit counters interface 1/1
interface e 1/1
rate-limit input 499321856 750000000
Bytes fwd: 440 Bytes drop: 20 Total: 460
To display the rate limiting policies on interface 1/3, enter the following command.
BigIron RX(config)# show rate-limit interface 1/3
interface e 1/3
rate-limit input vlan-id 10 499321856 750000000
rate-limit input vlan-id 20 97523712 200000000
To display rate-limit VLAN groups, enter the following.
BigIron RX(config)# show rate-limit group
rl-vlan-group 10
vlan 3 5 to 7
Syntax: show rate-limit [counters [interface <slot/port>]] [group [<vlan-number>]] [interface
The counters parameter displays bytes forwarded and dropped by the interfaces that have a
rate-limiting policy. <slot/port> specifies a particular interface.
The group <vlan-number> parameter indicates the rate limiting VLAN group for which the
rate-limiting policy is created.
interface <slot/port> displays the rate limiting policy for a particular interface.
508
<slot/port>]
BigIron RX Series Configuration Guide
53-1001986-01