Displaying Of Tcp/Udp Numbers In Acls - Dell PowerConnect B-RX Configuration Manual

BigIron RX(config)#show access-list name entry
Standard IP access list entry
deny host 5.6.7.8
deny host 192.168.12.3
permit any
Syntax: show access-list name <acl-name>
Enter the ACL name for the <acl-name> parameter or the ACL number for <acl-number>.

Displaying of TCP/UDP numbers in ACLs

You can display the port numbers of TCP/UDP application information instead of their TCP/UDP
well-known port name in the output of show commands and other commands that contain
application port information. For example, entering the following command causes the device to
display 80 (the port number) instead of http (the well-known port name).
BigIron(config)# ip show-acl-service-number
Syntax: [no] ip show-acl-service-number
By default, the device displays TCP/UDP application information in named notation.
The following table lists the ports by number and well-known name.
TABLE 100
Port service
number
1
2
3
5
11
13
17
18
19
20
21
22
23
25
27
29
31
33
38
BigIron RX Series Configuration Guide
53-1001986-01
TCP/UDP port numbers and names
Port name Description
tcpmux TCP Port Service Multiplexer
compressnt-2 Management Utility
compressnt-3 Compression Process
rje Remote Job Entry
systat Active Users
daytime Daytime (RFC 867)
qotd Quote of the Day
msp Message Send Protocol
chargen Character Generator
ftp-data File Transfer [Default Data]
ftp File Transfer [Control]
ssh SSH Remote Login Protocol
telnet Telnet
smtp Simple Mail Transfer
nsw-fe NSW User System FE
msg-icp MSG ICP
msg-auth MSG Authentication
dsp Display Support Protocol
rap Route Access Protocol
Displaying ACL definitions
21
537