Displaying Ipv6 Ospf Virtual Link Information; Displaying Ospfv3 Virtual Neighbor Information - Dell PowerConnect B-RX Configuration Manual

48
Displaying OSPFv3 information

Displaying IPv6 OSPF virtual link information

To display OSPFv3 virtual link information for the Brocade device, enter the following command at
any level of the CLI.
BigIron RX# show ipv6 ospf virtual-link
Index Transit Area ID
1
Syntax: show ipv6 ospf virtual-link
This display shows the following information.
TABLE 219
This field...
Index
Transit Area ID
Router ID
Interface Address
State

Displaying OSPFv3 virtual neighbor information

To display OSPFv3 virtual neighbor information for the Brocade device, enter the following
command at any level of the CLI.
BigIron RX# show ipv6 ospf virtual-neighbor
Index Router ID
1
Syntax: show ipv6 ospf virtual-neighbor
This display shows the following information.
TABLE 220
This field...
Index
Router ID
Address
1226
Router ID
1 1.1.1.1
OSPFv3 virtual link information
Displays...
An index number associated with the virtual link.
The ID of the shared area of two ABRs that serves as a connection point between the
two routers.
IPv4 address of the router at the other end of the virtual link (virtual neighbor).
The local address used to communicate with the virtual neighbor.
The state of the virtual link. Possible states include the following:
•
P2P – The link is functioning as a point-to-point interface.
•
DOWN – The link is down.
Address
1.1.1.1 3002::1
OSPFv3 virtual neighbor information
Displays...
An index number associated with the virtual neighbor.
IPv4 address of the virtual neighbor.
The IPv6 address to be used for communication with the virtual neighbor.
Interface Address
3003::2
State
Full
BigIron RX Series Configuration Guide
State
P2P
Interface
ethe 2/3
53-1001986-01