Closing Or Resetting A Neighbor Session - Dell PowerConnect B-RX Configuration Manual

To place a new or changed outbound policy or filter into effect, you must enter a clear ip bgp neighbor
command regardless of whether the neighbor session is up or down. You can enter the command
without optional parameters or with the soft out or soft-outbound option. Either way, you must
specify a parameter for the neighbor (<ip-addr>, <as-num>, <peer-group-name>, or all).
Displaying dynamic refresh information
You can use the show ip bgp neighbors command to display information for dynamic refresh
requests. For each neighbor, the display lists the number of dynamic refresh requests the device
has sent to or received from the neighbor and indicates whether the device received confirmation
from the neighbor that the neighbor supports dynamic route refresh.
The RefreshCapability field indicates whether this device has received confirmation from the
neighbor that the neighbor supports the dynamic refresh capability. The statistics in the Message
Sent and Message Received rows under Refresh-Req indicate how many dynamic refreshes have
been sent to and received from the neighbor. The statistic is cumulative across sessions.
BigIron RX(config-bgp)# show ip bgp neighbor 10.4.0.2
1

Closing or resetting a neighbor session

You can close a neighbor session or resend route updates to a neighbor.
BigIron RX Series Configuration Guide
53-1001986-01
IP Address: 10.4.0.2, AS: 5 (EBGP), RouterID: 100.0.0.1
Description: neighbor 10.4.0.2
State: ESTABLISHED, Time: 0h1m0s, KeepAliveTime: 0, HoldTime: 0
PeerGroup: pg1
Mutihop-EBGP: yes, ttl: 1
RouteReflectorClient: yes
SendCommunity: yes
NextHopSelf: yes
DefaultOriginate: yes (default sent)
MaximumPrefixLimit: 90000
RemovePrivateAs: : yes
RefreshCapability: Received
Route Filter Policies:
Distribute-list: (out) 20
Filter-list: (in) 30
Prefix-list: (in) pf1
Route-map: (in) setnp1
Messages: Open
Sent : 1
Received: 1
Last Update Time: NLRI
Tx: 0h0m59s
Last Connection Reset Reason:Unknown
Notification Sent:
Notification Received: Unspecified
TCP Connection state: ESTABLISHED
Byte Sent: 115, Received: 492
Local host: 10.4.0.1, Local
Remote host: 10.4.0.2, Remote Port: 8053
ISentSeq: 52837276
TotSent: 116
IRcvSeq: 2155052043
TotalRcv: 493
SendQue:
(out) setnp2
Update KeepAlive Notification Refresh-Req
1 1 0
8 1 0
Withdraw
---
Unspecified
Port: 179
SendNext: 52837392
ReTrans:
RcvNext: 2155052536
DupliRcv:
0 RcvQue:
Filtering
0
0
NLRI Withdraw
Rx: 0h0m59s ---
TotUnAck:
0 UnAckSeq: 52837392
SendWnd: 16384
0 RcvWnd: 16384
0 CngstWnd: 1460
26
0
811