Displaying Acls - Dell PowerConnect B-RX Configuration Manual

47

Displaying ACLs

BigIron RX# show running-config
ipv6 access-list rtr
remark This entry permits ipv6 packets from 3002::2 to any destination
permit ipv6 host 3000::2 any
remark This entry denies udp packets from any source to any destination
deny udp any any
remark This entry denies IPv6 packets from any source to any destination
deny ipv6 any any
Syntax: show running-config
The following example shows the comment text for the ACL named "rtr" in a show ipv6 access-list
display.
BigIron RX# show ipv6 access-list rtr
ipv6 access-list rtr: 3 entries
10: remark This entry permits ipv6 packets from 3002::2 to any destination
10: permit ipv6 host 3000::2 any
20: remark This entry denies udp packets from any source to any destination
20: deny udp any any
30: remark This entry denies IPv6 packets from any source to any destination
30: deny ipv6 any any
Syntax: show ipv6 access-list [<access-list-name>]
For the <access-list-name> parameter, specify the name of an IPv6 ACL created using the ipv6
access-list command.
Use the all keyword to display all IPv6 ACLs configured on the device.
Displaying ACLs
To display the ACLs configured on a device, enter the show ipv6 access-list command. Here is an
example.
:
BigIron RX# show ipv6 access-list
ipv6 access-list fdry: 8 entries
10: permit ipv6 host 3000::2 any
20: permit udp 3000::/16 any gt nfs
30: deny icmp host 5000::5 host 6000::3 echo-request
40: permit ipv6 host 3002::2 any
50: deny udp 3000::/16 4000::/16 gt nfs
60: permit tcp any any established
70: permit udp any any gt nfs
80: remark this is last entryipv6 access-list fdry: 3 entries
Syntax: show ipv6 access-list [<access-list-name>]
1188 BigIron RX Series Configuration Guide
53-1001986-01