Dell PowerConnect B-RX Configuration Manual page 1403
Bigiron rx series supporting multi-service ironware v02.7.03
Hide thumbs
Also See for PowerConnect B-RX:
- Configuration manual (1458 pages) ,
- Getting started manual (32 pages) ,
- Installation manual (240 pages)
Table of Contents
Advertisement
Commands
qos queue-type <queue-number> wred drop-precedence
<policing-status> min-avg-queue-size <min-size>
qos queue-type <queue-number> max-queue-size
<max-queue>
qos queue-type <queue-number> wred drop-precedence
<policing-status> packet-size-max <pkt-size>
qos queue-type <queue-number> wred enable
qos scheduler destination-weighted <queue0-weight>
<queue1-weight> <queue2-weight> <queue3-weight>
qos scheduler enhanced-strict <queue0-rate>
<queue1-rate> <queue2-rate> <queue3-rate>
qos scheduler max-rate <queue0-rate> <queue1-rate>
<queue2-rate> <queue3-rate>
qos scheduler min-rate <queue0-rate> <queue1-rate>
<queue2-rate> <queue3-rate>
qos scheduler source-weighted <queue0-weight>
<queue1-weight> <queue2-weight> <queue3-weight>
qos scheduler strict
qos-tos map cos-dscp <dscp0> <dscp1> <dscp2>
<dscp3> <dscp4> <dscp5> <dscp6> <dscp7>
qos-tos map cos-priority <prio0>
<prio1><prio2><prio3><prio4><prio5><prio6> <prio7>
qos-tos map dscp-dscp <old-dscp-value>
[<old-dscp-value>...]
to <new-dscp-value>
qos-tos map dscp-priority <dscp-value> [<dscp-value> ...]
to <priority>
qos-tos mark cos | dscp
qos-tos trust cos | dscp
qos-tos
show qos multicast [port-no]
show qos scheduler
show qos wred
show qos-tos
static-mac-address <mac-addr> ethernet <portnum>
[priority <num>]
BigIron RX Series Configuration Guide
53-1001986-01
Quality of Service (QoS)
See ...
"Setting the minimum and maximum average queue
size"
on page 483
"Configuring the maximum instantaneous queue
size"
on page 483
"Setting the maximum packet size"
"Enabling WRED"
on page 481
"Configuring WFQ destination-based traffic
scheduling"
on page 488
"Configuring enhanced strict priority-based traffic
scheduling"
on page 487
"Configuring maximum rate-based traffic scheduling"
on page 488
"Configuring minimum rate-based traffic scheduling"
on page 489
"Configuring WFQ source-based traffic scheduling"
on page 488
"Configuring strict priority-based traffic scheduling"
on page 487
"Changing the CoS –> DSCP mappings"
"Changing the DSCP –> internal forwarding priority
mappings"
on page 476
"Changing the DSCP –> DSCP mappings"
page 475
"Changing the DSCP –> internal forwarding priority
mappings"
on page 476
"Enabling marking"
on page 474
"Specifying trust level"
on page 474
"Enabling ToS-based QoS"
on page 474
"Displaying the multicast traffic engineering
configuration"
on page 491
"Displaying the scheduler configuration"
page 489
"Displaying the WRED configuration"
"Displaying QoS configuration information"
page 477
"Assigning static MAC address entries to priority
queues"
on page 473
E
on page 484
on page 475
on
on
on page 485
on
1331
Advertisement
Chapters
Table of Contents
