Dell PowerConnect B-RX Configuration Manual page 1130

41
Displaying IP multicast information
To clear the learned IGMP flows for a specific IP multicast group, enter a command such as the
following.
BigIron RX# clear ip multicast group 239.255.162.5
The following example shows how to clear the IGMP flows for a specific group and retain reports for
other groups.
BigIron RX# show ip multicast
IP multicast is enabled - Active
VLAN ID 1
Active 192.168.2.30 Router Ports
Multicast Group: 239.255.162.5, Port: 4/4 4/13
Multicast Group: 239.255.162.4, Port: 4/10 4/13
BigIron RX# clear ip multicast group 239.255.162.5
BigIron RX# show ip multicast
IP multicast is enabled - Active
VLAN ID 1
Active 192.168.2.30 Router Ports
Multicast Group: 239.255.162.4, Port: 4/10 4/13
Syntax: clear ip multicast all | group <group-id>
The all parameter clears the learned flows for all groups.
The group <group-id> parameter clears the flows for the specified group but does not clear the
flows for other groups.
1058
4/13
4/13
BigIron RX Series Configuration Guide
53-1001986-01