Displaying The Configured Ospf Area Prefix List; Modifying Ospf Traps Generated - Dell PowerConnect B-RX Configuration Manual

Bigiron rx series supporting multi-service ironware v02.7.03
Hide thumbs Also See for PowerConnect B-RX:
Table of Contents

Advertisement

25
Configuring OSPF

Displaying the configured OSPF area prefix list

To display the prefix-lists attached to the areas, enter the following command.
BigIron RX(config)#show ip ospf config
Router OSPF: Enabled
Graceful Restart: Disabled, timer 120
Graceful Restart Helper: Enabled
Redistribution: Disabled
Default OSPF Metric: 10
OSPF Auto-cost Reference Bandwidth: Disabled
OSPF Redistribution Metric: Type2
OSPF External LSA Limit: 14447047
OSPF Database Overflow Interval: 0
RFC 1583 Compatibility: Enabled
Router id: 5.5.5.1
Interface State Change Trap:
Virtual Interface State Change Trap:
Neighbor State Change Trap:
Virtual Neighbor State Change Trap:
Interface Configuration Error Trap:
Virtual Interface Configuration Error Trap:
Interface Authentication Failure Trap:
Virtual Interface Authentication Failure Trap: Enabled
Interface Receive Bad Packet Trap:
Virtual Interface Receive Bad Packet Trap:
Interface Retransmit Packet Trap:
Virtual Interface Retransmit Packet Trap:
Originate LSA Trap:
Originate MaxAge LSA Trap:
Link State Database Overflow Trap:
Link State Database Approaching Overflow Trap: Disabled
OSPF Area currently defined:
Area-ID
0
1
Syntax: show ip ospf config
DIsplaying the configured IP prefix list
To only display the configured ip prefix-list, enter a command such as the following.
BigIron RX# show ip prefix-lists
ip prefix-list abc: 2 entries
seq 5 deny 2.3.4.0/24
seq 10 permit 4.5.0.0/16.
Syntax: show ip prefix-lists <prefix-list-name>
The <prefix-list-name> parameter specifies the name of the prefix list. You use this name when
applying the prefix list to an area.

Modifying OSPF traps generated

OSPF traps as defined by RFC 1850 are supported on BigIron RX.
You can enable or disable OSPF trap generation by doing the following.
708
Area-Type
Cost
normal
0
normal
0
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Disabled
Disabled
Disabled
Disabled
Disabled
Prefix List In
Prefix List Out
Area_1_Pfx_list in
Area_1_Pfx_List_Out
BigIron RX Series Configuration Guide
53-1001986-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bigiron rx series

Table of Contents