Dell PowerConnect B-RX Configuration Manual page 1208

45
Displaying BGP4+ information
BigIron RX# show ipv6 bgp filtered-routes detail
Status A:AGGREGATE B:BEST b:NOT-INSTALLED-BEST C:CONFED_EBGP D:DAMPED
E:EBGP H:HISTORY I:IBGP L:LOCAL M:MULTIPATH S:SUPPRESSED F:FILTERED
1
2
3
4
5
6
Syntax: show ipv6 bgp filtered-routes detail [<ipv6-prefix>/<prefix-length> [longer-prefixes] |
The <ipv6-prefix>/<prefix-length> parameter displays the specified IPv6 prefix of the destination
network only. You must specify the <ipv6-prefix> parameter in hexadecimal using 16-bit values
between colons as documented in RFC 2373. You must specify the <prefix-length> parameter as a
decimal value. A slash mark (/) must follow the <ipv6-prefix> parameter and precede the
<prefix-length> parameter.
The longer-prefixes keyword allows you to display routes that match a specified or longer IPv6
prefix. For example, if you specify 2002::/16 longer-prefixes, then all routes with the prefix
2002::/16 or that have a longer prefix (such as 2002:e016::/32) are displayed.
The as-path-access-list <name> parameter specifies an AS-path ACL. Only the routes permitted by
the AS-path ACL are displayed.
The prefix-list <name> parameter specifies an IPv6 prefix list. Only the routes permitted by the
prefix list are displayed.
This display shows the following information:
TABLE 189
This field...
Status codes
Prefix
Status
Age
1136
Prefix: 800:2:1::/64, Status: EF, Age: 0h0m10s
NEXT_HOP: 2000:1:1::1, Learned from Peer: 2000:1:1::1 (100)
LOCAL_PREF: 100, MED: 0, ORIGIN: incomplete, Weight: 0
AS_PATH: 100
Prefix: 900:1:18::/64, Status: EF, Age: 0h0m10s
NEXT_HOP: 2000:1:1::1, Learned from Peer: 2000:1:1::1 (100)
LOCAL_PREF: 100, MED: 0, ORIGIN: incomplete, Weight: 0
AS_PATH: 100
Prefix: 1000:1:1::/64, Status: EF, Age: 0h0m10s
NEXT_HOP: 2000:1:1::1, Learned from Peer: 2000:1:1::1 (100)
LOCAL_PREF: 100, MED: 0, ORIGIN: incomplete, Weight: 0
AS_PATH: 100
Prefix: 2000:1:1::/64, Status: EF, Age: 0h0m10s
NEXT_HOP: 2000:1:1::1, Learned from Peer: 2000:1:1::1 (100)
LOCAL_PREF: 100, MED: 0, ORIGIN: incomplete, Weight: 0
AS_PATH: 100
Prefix: 2000:1:11::1/128, Status: EF, Age: 0h0m10s
NEXT_HOP: 2000:1:1::1, Learned from Peer: 2000:1:1::1 (100)
LOCAL_PREF: 100, MED: 0, ORIGIN: igp, Weight: 0
AS_PATH: 100
Prefix: 2000:1:17::/64, Status: EF, Age: 0h0m10s
NEXT_HOP: 2000:1:1::1, Learned from Peer: 2000:1:1::1 (100)
LOCAL_PREF: 100, MED: 0, ORIGIN: incomplete, Weight: 0
AS_PATH: 100
[as-path-access-list <name>] | [prefix-list <name>]
Detailed filtered-rut BGP4+ route information
Displays...
A list of the characters the display uses to indicate the route's status.
The Status field display an "F" for each filtered route.
For information about this field, refer to
For information about this field, refer to
The age of the route, in seconds.
Table 188 on page 1134.
Table 188 on page 1134.
BigIron RX Series Configuration Guide
53-1001986-01