Hub Configuration - Dell PowerConnect B-RX Configuration Manual

33
Sample 802.1x configurations
FIGURE 125
The following commands configure the BigIron RX in
BigIron RX(config)# aaa authentication dot1x default radius
BigIron RX(config)# radius-server host 192.168.9.22 auth-port 1812 acct-port 1813
default key mirabeau dot1x
BigIron RX(config)# dot1x-enable e 2/1 to 2/3
BigIron RX(config-dot1x)# re-authentication
BigIron RX(config-dot1x)# timeout re-authperiod 2000
BigIron RX(config-dot1x)# timeout quiet-period 30
BigIron RX(config-dot1x)# timeout tx-period 60
BigIron RX(config-dot1x)# max-req 6
BigIron RX(config-dot1x)# exit
BigIron RX(config)# interface e 2/1
BigIron RX(config-if-e100-1)# dot1x port-control auto
BigIron RX(config-if-e100-1)# exit
BigIron RX(config)# interface e 2/2
BigIron RXconfig-if-e100-2)# dot1x port-control auto
BigIron RX(config-if-e100-2)# exit
BigIron RX(config)# interface e 2/3
BigIron RX(config-if-e100-3)# dot1x port-control auto
BigIron RX(config-if-e100-3)# exit

Hub configuration

Figure 126
which is connected to a port on the BigIron RX device. The configuration is similar to that in
Figure
command is used to allow multiple Clients on the port.
974
Sample point-to-point 802.1x configuration
Clients/Supplicants running 802.1X-compliant client software
illustrates a configuration where three 802.1x-enabled Clients are connected to a hub,
125, except that 802.1x port security is enabled on only one port, and the multiple-hosts
RADIUS Server
(Authentication Server)
192.168.9.22
BigIron Device
(Authenticator)
e2/2
e2/1 e2/3
Figure 125.
BigIron RX Series Configuration Guide
53-1001986-01