Dell PowerConnect B-RX Configuration Manual page 1383

Bigiron rx series supporting multi-service ironware v02.7.03
Hide thumbs Also See for PowerConnect B-RX:
Table of Contents

Advertisement

Commands
ip mtu <num>
ip proxy-arp
ip redirect
ip route <dest-ip-addr> <dest-mask> |
<dest-ip-addr>/<mask-bits> <next-hop-ip-addr> |
ethernet <slot/port> | ve <num> [<metric>] [tag <num>]
[distance <num>]
ip route <ip-addr> <ip-mask> |
<dest-ip-addr>/<mask-bits> null0 [<metric>] [tag <num>]
[distance <num>]
ip router-id <ip-addr>
Ip show-portname
ip show-subnet-length
ip source-route
ip radius source-interface
ethernet <slot/port> |
loopback <num> |
ve <num>
ip tacacs source-interface
ethernet <slot/port> |
loopback <num> |
ve <num>
ip telnet source-interface ethernet<slot/port> |
loopback <num> |
ve <num>
ip ttl <1-255>
rate-limit-arp <num>
router-interface ve <num>
show arp [ethernet <slot/port> | mac-address
<xxxx.xxxx.xxxx> [<mask>] | <ip-addr> [<ip-mask>]]
[<num>] [| begin<expression> | exclude<expression> |
include<expression>]
show ip
show ip cache [<ip-addr>] [| begin<expression> |
exclude<expression> | include<expression> ]
show ip interface [ethernet <slot/port>] | [loopback
<num>] | [ve <num>]
show ip route <num> | [<ip-addr> [<ip-mask>] [debug |
detail | longer] ] | connected | bgp | isis | ospf | rip |
static | summary ] [| begin<expression> |
exclude<expression> | include<expression>]
BigIron RX Series Configuration Guide
53-1001986-01
See ...
"Changing the maximum transmission unit on an
individual interface"
on page 180
"Enabling proxy ARP"
on page 189
"Disabling ICMP redirect messages"
"Configuring a static IP route"
"Configuring a "null" route"
on page 200
"Changing the router ID"
on page 180
"Displaying interface name in Syslog"
"Changing the network mask display to prefix format"
on page 162
"Disabling forwarding of IP source-routed packets"
page 193
"Specifying a single source interface for Telnet,
TACACS, TACACS+, or RADIUS packets"
"Specifying a single source interface for Telnet,
TACACS, TACACS+, or RADIUS packets"
"Specifying a single source interface for Telnet,
TACACS, TACACS+, or RADIUS packets"
"Changing the TTL threshold"
"Rate limiting ARP packets"
on page 186
"Assigning an IP address to a virtual interface"
page 161
"Displaying the ARP cache"
on page 222
"Displaying global IP configuration information"
page 219
"Displaying the forwarding cache"
"Displaying IP interface information"
"Displaying the IP route table"
E
IP
on page 196
on page 199
on page 222
on
on page 181
on page 181
on page 181
on page 192
on
on
on page 224
on page 221
on page 226
1311

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bigiron rx series

Table of Contents