Dell PowerConnect B-RX Configuration Manual page 1287

TABLE 210
This field...
Interface
OSPF
Status
State
Area
For example, to display detailed information about Ethernet interface 2, enter the following
command at any level of the CLI.
BigIron RX# show ipv6 ospf interface ethernet 3/2
ethe 3/2 is up, type BROADCAST
IPv6 Address:
Instance ID 0, Router ID 223.223.223.223
Area ID 0, Cost 1
State DR, Transmit Delay 1 sec, Priority 1
Timer intervals :
DR:223.223.223.223 BDR:1.1.1.1
DRElection:
Neighbor Count = 1,
This display shows the following information.
BigIron RX Series Configuration Guide
53-1001986-01
Summary of OSPFv3 interface information
Displays...
The interface type, and the port number or number of the interface.
The state of OSPFv3 on the interface. Possible states include the following:
•
Enabled.
•
Disabled.
The status of the link. Possible status include the following:
•
Up.
•
Down.
The state of the interface. Possible states includes the following:
•
DR – The interface is functioning as the Designated Router for OSPFv3.
•
BDR – The interface is functioning as the Backup Designated Router for OSPFv3.
•
Loopback – The interface is functioning as a loopback interface.
•
P2P – The interface is functioning as a point-to-point interface.
•
Passive – The interface is up but it does not take part in forming an adjacency.
•
Waiting – The interface is trying to determine the identity of the BDR for the network.
•
None – The interface does not take part in the OSPF interface state machine.
•
Down – The interface is unusable. No protocol traffic can be sent or received on such
a interface.
•
DR other – The interface is a broadcast or NBMA network on which another router is
selected to be the DR.
The OSPF area to which the interface belongs.
2002:c0a8:46a::1/64
2000:4::106/64
Hello 10, Dead 40, Retransmit 5
5 times, DelayedLSAck:
Adjacent Neighbor Count= 1
Neighbor:
1.1.1.1 (BDR)
Statistics of interface ethe 3/2:
Type tx rx tx-byte rx-byte
Unknown 0 0
Hello 3149 3138 1259284 1255352
DbDesc 7 6
LSReq 2 2
LSUpdate 1508 530
LSAck 526 1398
Displaying OSPFv3 information
Number of I/F scoped LSAs is 2
523 times
0 0
416 288
80 152
109508 39036
19036 54568
48
1215