Dell PowerConnect B-RX Configuration Manual page 899

TABLE 123
This field...
TotalRcv
DupliRcv
RcvWnd
SendQue
RcvQue
CngstWnd
Displaying route information for a neighbor
You can display routes based on the following criteria:
•
•
•
•
•
•
Displaying summary route information
To display summary route information, enter a command such as the following at any level of the
CLI.
BigIron RX(config-bgp)# show ip bgp neighbor 10.1.0.2 routes-summary
1
Routes Accepted/Installed:1,
Routes Selected as BEST Routes:1
Unreachable Routes (no IGP Route for NEXTHOP):0
History Routes:0
NLRIs Received in Update Message:24,
NLRIs Discarded due to
Routes Advertised:0,
NLRIs Sent in Update Message:0,
Peer Out of Memory Count for:
Receiving Update Messages:0, Accepting Routes(NLRI):0
Attributes:0, Outbound Routes(RIB-out):0
BigIron RX Series Configuration Guide
53-1001986-01
BGP4 neighbor information (Continued)
A summary of the routes for a specific neighbor.
The routes received from the neighbor that the device selected as the best routes to their
destinations.
The routes received from the neighbor that are the best BGP4 routes to their destinations, but
were nonetheless not installed in the IP route table because the device received better routes
from other sources (such as OSPF, RIP, or static IP routes).
The routes that are unreachable because the device does not have a valid RIP, OSPF, or static
route to the next hop.
Routes for a specific network advertised by the device to the neighbor.
The Routing Information Base (RIB) for a specific network advertised to the neighbor. You can
display the RIB regardless of whether the device has already sent it to the neighbor.
IP Address: 10.1.0.2
BEST Routes not Installed in IP Forwarding Table:0
Maximum Prefix Limit:0, AS Loop:0
Invalid Nexthop:0, Invalid Nexthop Address:0.0.0.0
Duplicated Originator_ID:0, Cluster_ID:0
To be Sent:0,
Displaying BGP4 information
Displays...
The number of sequence numbers received from the neighbor.
The number of duplicate sequence numbers received from the neighbor.
The size of the receive window.
The number of sequence numbers in the send queue.
The number of sequence numbers in the receive queue.
The number of times the window has changed.
Filtered/Kept:11, Filtered:11
Withdraws:0 (0),
To be Withdrawn:0
Withdraws:0, Replacements:0
26
Replacements:1
827