Dell PowerConnect B-RX Configuration Manual page 893

The attribute-entries option shows the attribute-entries associated with routes received from the
neighbor.
The flap-statistics option shows the route flap statistics for routes received from or sent to the
neighbor.
The last-packet-with-error option displays the last packet from the neighbor that contained an error.
The packet's contents are displayed in decoded (human-readable) format.
The received prefix-filter option shows the Outbound Route Filters (ORFs) received from the
neighbor. This option applies to cooperative route filtering.
The received-routes option lists all the route information received in route updates from the
neighbor since the soft reconfiguration feature was enabled. Refer to
on page 807.
The routes option lists the routes received in UPDATE messages from the neighbor. You can specify
the following additional options:
•
•
•
•
The rib-out-routes option lists the route information base (RIB) for outbound routes. You can
display all the routes or specify a network address.
The routes-summary option displays a summary of the following information:
•
•
•
•
•
This display shows the following information.
TABLE 123
This field...
IP Address
AS
EBGP/IBGP
RouterID
BigIron RX Series Configuration Guide
53-1001986-01
best – Displays the routes received from the neighbor that the device selected as the best
routes to their destinations.
not-installed-best – Displays the routes received from the neighbor that are the best BGP4
routes to their destinations, but were nonetheless not installed in the IP route table because
the device received better routes from other sources (such as OSPF, RIP, or static IP routes).
unreachable – Displays the routes that are unreachable because the device does not have a
valid RIP, OSPF, or static route to the next hop.
detail – Displays detailed information for the specified routes. You can refine your information
request by also specifying one of the options above (best, not-installed-best, or unreachable).
Number of routes received from the neighbor
Number of routes accepted by this device from the neighbor
Number of routes this device filtered out of the UPDATES received from the neighbor and did
not accept
Number of routes advertised to the neighbor
Number of attribute entries associated with routes received from or advertised to the neighbor.
BGP4 neighbor information
Displaying BGP4 information
Displays...
The IP address of the neighbor.
The AS the neighbor is in.
Whether the neighbor session is an IBGP session, an EBGP session, or a
confederation EBGP session.
•
EBGP – The neighbor is in another AS.
•
EBGP_Confed – The neighbor is a member of another sub-AS in the
same confederation.
•
IBGP – The neighbor is in the same AS.
The neighbor's router ID.
26
"Using soft reconfiguration"
821