Changing The Global Violation Action; Changing The Violation Action For An Interface - Dell PowerConnect B-RX Configuration Manual

•
•
•

Changing the global violation action

If the global violation action changes from shutdown or restrict to deny, then the following occur:
•
•
•
•
If the global violation action changes from deny to shutdown or restrict, the following occur:
•
•
•
•

Changing the violation action for an interface

The following events occur when the violation action for an interface is changed:
•
•
•
BigIron RX Series Configuration Guide
53-1001986-01
Understanding the rules for violation action configuration
If shutdown or restrict is the violation action configured at the global level and no violation
action is configured in the interface level, then the interface inherits the secure MAC list
configured at the global level.
If deny is the violation action at the global level and no violation action is configured at the
interface level, then the interface inherits the global deny MAC list.
If no violation action is configured on an interface, then the interface inherits the violation
action configured at the global level.
All interfaces that inherit the global violation action inherit the new global violation action.
All MAC address entries are cleared on all interfaces that inherit the new global violation
action.
Interfaces that are configured with shutdown or restrict violation action will continue to use
their configured violation action; however, any secure MAC addresses inherited from the global
secure MAC address list will no longer be secure,but the secure MAC addresses at the
interface level will remain secure.
Interfaces on which deny is the configured violation action inherit any new secure MAC
addresses configured at the global level.
All interfaces that inherit the global violation action inherit the new global violation action.
All MAC address entries are cleared on all interfaces that inherit the new global violation
action.
Interfaces that are configured with shutdown or restrict violation action inherit any new deny
MAC addresses configured at the global level.
Interfaces that are configured with deny violation action will continue to use the deny violation
action; however, all entries in the MAC table are cleared and any MAC entries in the deny MAC
address list that were inherited from the global deny MAC address list will no longer be denied.
The interface will continue to use the deny MAC addresses configured in its own deny MAC
address list.
If the violation action for an interface is different from the global violation action, then the MAC
entries for the interface are cleared.
If the violation action for an interface is either shutdown or restrict but the action for the global
level is deny, then the interface inherits the global deny MAC address list. The entries in the
global deny MAC addreslist are added to the interface's deny MAC address list. Similar event
occurs if the violation action for an interface is deny but the action at the global level is
shutdown or restrict.
When the violation action for an interface is being configured, the violation action of that
interface is updated to the new configured action, irrespective of its current value. Changing
the violation action for an interface clears the MAC addresses entries for that interface.
32
939