Dell PowerConnect B-RX Configuration Manual page 1220

Bigiron rx series supporting multi-service ironware v02.7.03
Hide thumbs Also See for PowerConnect B-RX:
Table of Contents

Advertisement

45
Displaying BGP4+ information
TABLE 193
This field...
Number of BGP4+ Routes advertised to
specified neighbor (appears only in
display for all routes)
Status codes
Prefix
Status
Age
Next Hop
Learned from Peer
LOCAL_PREF
MED
Origin
Weight
AS-PATH
Adj RIB out count
Admin distance
Displaying BGP4+ neighbor route-attribute entries
The route-attribute entries table lists sets of BGP4+ attributes stored in the switch's memory. Each
set of attributes is unique and can be associated with one or more routes. In fact, the switch
typically has fewer route attribute entries than routes.
For example, to display the route-attribute entries table for a BGP4+ neighbor 2000:4::110, enter
the following command.
1148
Detailed route information advertised to a BGP4+ neighbor
Displays...
For information about this field, refer to
For information about this field, refer to
For information about this field, refer to
For information about this field, refer to
The age of the advertised route, in seconds.
For information about this field, refer to
The IPv6 address of the neighbor from which this route is learned. "Local
Router" indicates that the switch itself learned the route.
For information about this field, refer to
The value of the advertised route's MED attribute. If the route does not
have a metric, this field is blank.
The source of the route information. The origin can be one of the
following:
When BGP4+ compares multiple routes to a destination to select the
best route, IGP is preferred over EGP and both are preferred over
INCOMPLETE.
For information about this field, refer to
The AS-path information for the route.
The number of routes in the switch's current BGP4+ Routing Information
Base (Adj-RIB-Out) for a specified neighbor.
The administrative distance of the route.
EGP – The routes with this set of attributes came to BGP4+ through
EGP.
IGP – The routes with this set of attributes came to BGP4+ through
IGP.
INCOMPLETE – The routes came from an origin other than one of
the above. For example, they may have been redistributed from
OSPFv3 or RIPng.
Table 192
on page 1147.
Table 192
on page 1147.
Table 192
on page 1147.
Table 192
on page 1147.
Table 192
on page 1147.
Table 192
on page 1147.
Table 192
on page 1147.
BigIron RX Series Configuration Guide
53-1001986-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bigiron rx series

Table of Contents