Redistributing Routes Into Ospfv3 - Dell PowerConnect B-RX Configuration Manual

48
Configuring OSPFv3
•
•
•
•
The costs for 10 Mbps, 100 Mbps, and 155 Mbps ports change as a result of the changed
reference bandwidth. Costs for higher-speed interfaces remain the same.
Syntax: [no] auto-cost reference-bandwidth <number>
The <number> parameter specifies the reference bandwidth and can be a value from 1 –
4294967. The default is 100.
To restore the reference bandwidth to its default value and thus restore the default costs of
interfaces to their default values, enter the no form of this command.

Redistributing routes into OSPFv3

In addition to specifying which routes are redistributed into OSPFv3, you can configure the following
aspects related to route redistribution:
•
•
•
Configuring route redistribution into OSPFv3
You can configure the Brocade device to redistribute routes from the following sources into
OSPFv3:
•
•
•
•
•
You can redistribute routes in the following ways:
•
•
For example, to configure the redistribution of all IPv6 static,RIPng, and IPv6 IS-IS level-1 and
level-2 routes, enter the following commands.
BigIron RX(config-ospf6-router)# redistribute static
BigIron RX(config-ospf6-router)# redistribute rip
BigIron RX(config-ospf6-router)# redistribute isis level-1-2
Syntax: [no] redistribute bgp | connected | isis [level-1 | level-1-2 | level-2] | rip | static [metric
The bgp | connected | isis | rip | static keywords specify the route source.
1196
1000 Mbps port's cost = 500/1000 = 0.5, which is rounded up to 1
155 Mbps port's cost = 500/155 = 3.23, which is rounded up to 4
622 Mbps port's cost = 500/622 = 0.80, which is rounded up to 1
2488 Mbps port's cost = 500/2488 = 0.20, which is rounded up to 1
Default metric
Metric type
Advertisement of an external aggregate route
IPv6 static routes
Directly connected IPv6 networks
BGP4+
IPv6 IS-IS
RIPng
By route types, for example, the Brocade device redistributes all IPv6 static and RIPng routes.
By using a route map to filter which routes to redistribute, for example, the Brocade device
redistributes specified IPv6 static and RIPng routes only.
<number> | metric-type <type>]
BigIron RX Series Configuration Guide
53-1001986-01