Dell PowerConnect B-RX Configuration Manual page 1354

Bigiron rx series supporting multi-service ironware v02.7.03
Hide thumbs Also See for PowerConnect B-RX:
Table of Contents

Advertisement

A
Syslog messages
TABLE 224
Message level
Notification
Notification
1282
Brocade Syslog messages (Continued)
Message
OSPF virtual intf rcvd bad pkt,
rid <router-id>, intf addr <ip-addr>,
pkt src addr <src-ip-addr>,
pkt type <pkt-type>
OSPF intf retransmit, rid <router-id>,
intf addr <ip-addr>, nbr rid <nbr-router-id>,
pkt type is <pkt-type>, LSA type <lsa-type>,
LSA id <lsa-id>, LSA rid <lsa-router-id>
Explanation
Indicates that an OSPF interface received a
bad packet.
The <router-id> is the router ID of the device.
The <ip-addr> is the IP address of the
interface on the device.
The <src-ip-addr> is the IP address of the
interface from which the device received the
authentication failure.
The <packet-type> can be one of the
following:
hello
database description
link state request
link state update
link state ack
unknown
An OSPF interface on the device has
retransmitted a Link State Advertisement
(LSA).
The <router-id> is the router ID of the device.
The <ip-addr> is the IP address of the
interface on the device.
The <nbr-router-id> is the router ID of the
neighbor router.
The <packet-type> can be one of the
following:
hello
database description
link state request
link state update
link state ack
unknown
The <lsa-type> is the type of LSA.
The <lsa-id> is the LSA ID.
The <lsa-router-id> is the LSA router ID.
BigIron RX Series Configuration Guide
53-1001986-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bigiron rx series

Table of Contents