Clearing 802.1X Statistics; Displaying Dynamically Assigned Vlan Information - Dell PowerConnect B-RX Configuration Manual

TABLE 159
This field...
RX EAPOL Start
RX EAPOL Logoff
RX EAPOL Invalid
RX EAPOL Total
RX EAP Resp/Id
RX EAP Resp other than Resp/Id
RX EAP Length Error
Last EAPOL Version
Last EAPOL Source
TX EAPOL Total
TX EAP Req/Id
TX EAP Req other than Req/Id
Num sessions
Num Restricted Sessions
Num Authorized Sessions

Clearing 802.1x statistics

You can clear the 802.1x statistics counters on all interfaces at once, on individual interfaces, or
on a range of interfaces.
For example, to clear the 802.1x statistics counters on all interfaces on the device, enter the
following command.
BigIron RX# clear dot1x statistics all
Syntax: clear dot1x statistics all
To clear the 802.1x statistics counters on interface e 3/11, enter the following command.
BigIron RX# clear dot1x statistics e 3/11
Syntax: clear dot1x statistics [mac-address | ethernet <slot>/<portnum>]

Displaying dynamically assigned VLAN information

The show interface command displays the VLAN to which an 802.1x-enabled port has been
dynamically assigned, as well as the port from which it was moved (that is, the port's default VLAN).
The following is an example of the show interface command indicating the port's dynamically
assigned VLAN. Information about the dynamically assigned VLAN is shown in bold type.
BigIron RX Series Configuration Guide
53-1001986-01
Output from the show dot1x statistics command
Displays...
The number of EAPOL-Start frames received on the port.
The number of EAPOL-Logoff frames received on the port.
The number of invalid EAPOL frames received on the port.
The total number of EAPOL frames received on the port.
The number of EAP-Response/Identity frames received on the port
The total number of EAPOL-Response frames received on the port that
were not EAP-Response/Identity frames.
The number of EAPOL frames received on the port that have an invalid
packet body length.
The version number of the last EAPOL frame received on the port.
The source MAC address in the last EAPOL frame received on the port.
The total number of EAPOL frames transmitted on the port.
The number of EAP-Request/Identity frames transmitted on the port.
The number of EAP-Request frames transmitted on the port that were
not EAP-Request/Identity frames.
Total number of dot1x sessions, which include authenticated, restricted,
denied and sessions in the initial state.
Number of current 802.1x sessions that failed authentication. The user
configuration was moved into a restricted VLAN.
Number of current 802.1x authenticated sessions that are authorized.
Displaying 802.1x information
33
969