Index To The Cli Commands; Acls (Ip); Numbered Acl - Dell PowerConnect B-RX Configuration Manual

Index to the CLI Commands

This appendix lists the CLI commands discussed in this configuration guide. Look for the CLI
command alphabetically by feature. You can also use your browser's search function to find the
command you want. When you find the command, click on the link to display the section that
discusses that command.

ACLs (IP)

Numbered ACL

Commands
access-list <num> deny | permit <ip-protocol>
<source-ip> | <hostname> <wildcard> [<operator>
<source-tcp/udp-port>] <destination-ip> | <hostname>
<wildcard> [<operator> <destination-tcp/udp-port>]
[match-all <tcp-flags>] [match-any <tcp-flags>]
[<icmp-type>] [established] [precedence <name> |
<num>]
[tos <number>] [dscp-matching <number>]
[802.1p-priority-matching <number>] [dscp-marking
<number> 802.1p-priority-marking <number>
internal-priority-marking <number>] | [dscp-marking
<number> dscp-cos-mapping] | [dscp-cos-mapping]
[fragment] [non-fragment] [first-fragment] [fragment-offset
<number>] [spi <00000000 - ffffffff>] [log]
access-list <num> deny | permit host <ip-protocol> any
any [log]
access-list <num> deny | permit icmp any any [log]
<icmp-type> | <type-number> <code-number>
access-list <num> deny | permit any I <source-ip>
|<source-ip>/<mask-bits> | <hostname> <wildcard>
[log]
access-list <acl-num> remark [<comment-text>]
no access-list <acl-number>
<entire-deny-or-permit-statement>
show access-list <acl-num> | all
BigIron RX Series Configuration Guide
53-1001986-01
See ...
"Configuring extended numbered ACLs"
"Enabling ACL filtering of fragmented or
non-fragmented packets" on page 560
"ICMP filtering for extended ACLs"
"Configuring standard numbered ACLs"
"Numbered ACLs: adding a comment"
"Numbered ACLs: deleting a comment"
"Deleting ACL entries" on page 552
"Displaying ACL definitions" on page 536
Appendix
E
on page 523
on page 561
on page 521
on page 550
on page 551
1301