Displaying Ripng Configuration; Displaying Ripng Routing Table - Dell PowerConnect B-RX Configuration Manual

Bigiron rx series supporting multi-service ironware v02.7.03
Hide thumbs Also See for PowerConnect B-RX:
Table of Contents

Advertisement

Displaying RIPng configuration

To display RIPng configuration information, enter the following command at any CLI level.
BigIron RX# show ipv6 rip
IPv6 rip enabled, port 521
Syntax: show ipv6 rip
This display shows the following information:
TABLE 181
This field...
IPv6 RIP status/port
Administrative distance
Updates/expiration
Holddown/garbage collection
Split horizon/poison reverse
Default routes
Periodic updates/trigger updates
Distribution lists
Redistribution

Displaying RIPng routing table

To display the RIPng routing table, enter the following command at any CLI level.
BigIron RX Series Configuration Guide
53-1001986-01
RIPng routing table
Administrative distance is 120
Updates every 30 seconds, expire after 180
Holddown lasts 180 seconds, garbage collect after 120
Split horizon is on; poison reverse is off
Default routes are not generated
Periodic updates 0, trigger updates 0
Distribute List, Inbound : Not set
Distribute List, Outbound : Not set
Redistribute: CONNECTED
RIPng configuration fields
Displays...
The status of RIPng on the Brocade device. Possible status is "enabled" or
"disabled."
The UDP port number over which RIPng is enabled.
The setting of the administrative distance for RIPng.
The settings of the RIPng update and timeout timers.
The settings of the RIPng hold-down and garbage-collection timers.
The status of the RIPng split horizon and poison reverse features. Possible
status is "on" or "off."
The status of RIPng default routes.
The number of periodic updates and triggered updates sent by the RIPng
router.
The inbound and outbound distribution lists applied to RIPng.
The types of IPv6 routes redistributed into RIPng. The types can include the
following:
STATIC – IPv6 static routes are redistributed into RIPng.
CONNECTED – Directly connected IPv6 networks are redistributed into
RIPng.
BGP – BGP4+ routes are redistributed into RIPng.
ISIS – IPv6 IS-IS routes are redistributed into RIPng.
OSPF – OSPFv3 routes are redistributed into RIPng.
Displaying RIPng information
44
1107

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bigiron rx series

Table of Contents