Sample 802.1X Configurations; Point-To-Point Configuration - Dell PowerConnect B-RX Configuration Manual

Syntax: show dot1x mac-session brief [ | begin <expression> | exclude <expression> | include
The following table describes the information displayed by the show dot1x mac-session brief
command.
TABLE 161
This field...
Port
Number of users
Dynamic VLAN
Dynamic ACL
Dynamic MAC Filters

Sample 802.1x configurations

This section illustrates a sample point-to-point configuration and a sample hub configuration that
use 802.1x port security.

Point-to-point configuration

Figure 125
BigIron RX device. In a point-to-point configuration, only one 802.1x Client can be connected to
each port.
BigIron RX Series Configuration Guide
53-1001986-01
<expression>]
Output from the show dot1x mac-session brief command
illustrates a sample 802.1x configuration with Clients connected to three ports on the
Sample 802.1x configurations
Displays...
Information about the users connected to each port.
The number of restricted and authorized (those that were successfully
authenticated) users connected to the port.
Whether or not the port is a member of a RADIUS-specified VLAN.
Whether or not a RADIUS-specified ACL has been applied to the port for
incoming (in) and outgoing (out) traffic.
Whether or not a RADIUS-specified MAC Filter has been applied to the
port.
33
973