Displaying Ospfv3 Neighbor Information - Dell PowerConnect B-RX Configuration Manual

Bigiron rx series supporting multi-service ironware v02.7.03
Hide thumbs Also See for PowerConnect B-RX:
Table of Contents

Advertisement

48
Displaying OSPFv3 information
This display shows the following information.
TABLE 212
This field...
Total Static Memory
Allocated
Total Dynamic Memory
Allocated
Memory Type
Size
Allocated
Max-alloc
Alloc-Fails

Displaying OSPFv3 neighbor information

You can display a summary of OSPFv3 neighbor information for the Brocade device or detailed
information about a specified neighbor.
To display a summary of OSPFv3 neighbor information for the device, enter the following command
at any CLI level.
BigIron RX# show ipv6 ospf neighbor
RouterID
1.1.1.1
Syntax: show ipv6 ospf neighbor [router-id <ipv4-address>]
The router-id <ipv4-address> parameter displays only the neighbor entries for the specified router.
This display shows the following information.
TABLE 213
Field
Router ID
Pri
State
DR
1218
OSPFv3 memory usage information
Displays...
A summary of the amount of static memory allocated, in bytes, to OSPFv3.
A summary of the amount of dynamic memory allocated, in bytes, to OSPFv3.
The type of memory used by OSPFv3. (This information is for use by Brocade's
technical support in case of a problem.)
The size of a memory type.
The amount of memory currently allocated to a memory type.
The maximum amount of memory that was allocated to a memory type.
The number of times an attempt to allocate memory to a memory type failed.
Pri State
DR
1 Full
223.223.223.223 1.1.1.1
Summary of OSPFv3 neighbor information
Description
The IPv4 address of the neighbor. By default, the Brocade router ID is the IPv4 address
configured on the lowest numbered loopback interface. If the device does not have a loopback
interface, the default router ID is the lowest numbered IPv4 address configured on the device.
The OSPFv3 priority of the neighbor. The priority is used during election of the DR and BDR.
The state between the Brocade device and the neighbor. The state can be one of the following:
Down
Attempt
Init
2-Way
ExStart
Exchange
Loading
Full
The router ID (IPv4 address) of the DR.
BDR
Interface[State]
ethe 3/2
BigIron RX Series Configuration Guide
[DR]
53-1001986-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bigiron rx series

Table of Contents