Dell PowerConnect B-RX Configuration Manual page 1314

49
IPv6 PIM sparse
Candidate-RP-advertisement period: 60
BigIron RX#
This example show information displayed on a device that has been elected as the BSR. The
following example shows information displayed on a device that is not the BSR. Notice that some
fields shown in the example above do not appear in the example below.
BigIron RX>show ipv6 pim bsr
PIMv2 Bootstrap information
BSR address
BSR priority = 0
BigIron RX>
Syntax: show ipv6 pim bsr.
This display shows the following information.
This field...
BSR address
Uptime
BSR priority
Hash mask length
Next bootstrap message in
Next
Candidate-RP-advertisement
message in
RP
group prefixes
Candidate-RP-advertisement
period
Displaying candidate RP information
To display candidate RP information, enter the following command at any CLI level.
1242
group prefixes:
ff00:: / 8
= 2001:3e8:255:255::17
Displays...
The IPv6 address of the interface configured as the IPv6 PIM Sparse Bootstrap
Router (BSR).
The amount of time the BSR has been running.
NOTE: This field appears only if this device is the BSR.
The priority assigned to the interface for use during the BSR election process.
During BSR election, the priorities of the candidate BSRs are compared and the
interface with the highest BSR priority becomes the BSR.
The number of significant bits in the IPv6 multicast group comparison mask. This
mask determines the IPv6 multicast group numbers for which the device can be a
BSR. The default is 32 bits, which allows the device to be a BSR for any valid IPv6
multicast group number.
NOTE: This field appears only if this device is a candidate BSR.
Indicates how many seconds will pass before the BSR sends its next Bootstrap
message.
NOTE: This field appears only if this device is the BSR.
Indicates how many seconds will pass before the BSR sends its next candidate PR
advertisement message.
NOTE: This field appears only if this device is a candidate BSR.
Indicates the IPv6 address of the Rendezvous Point (RP).
NOTE: This field appears only if this device is a candidate BSR.
Indicates the multicast groups for which the RP listed by the previous field is a
candidate RP.
NOTE: This field appears only if this device is a candidate BSR.
Indicates how frequently the BSR sends candidate RP advertisement messages.
NOTE: This field appears only if this device is a candidate BSR.
BigIron RX Series Configuration Guide
53-1001986-01