23
Clearing MSDP information
Displaying source active cache information
To display the Source Actives in the MSDP cache, use the following CLI method.
BigIron RX# show ip msdp sa-cache
Total Entry 4096, Used 1800 Free 2296
Index
1
2
3
4
5
6
7
8
9
10
Syntax: show ip msdp sa-cache
This display shows the following information.
TABLE 107
This field...
Total Entry
Used
Free
Index
SourceAddr
GroupAddr
RP
Age
Clearing MSDP information
You can clear the following MSDP information:
•
•
•
Clearing peer information
To clear MSDP peer information, enter the following command at the Privileged EXEC level of the
CLI.
646
SourceAddr
GroupAddr
(100.100.1.254, 232.1.0.95), RP:206.251.17.41, Age:0
(100.100.1.254, 237.1.0.98), RP:206.251.17.41, Age:30
(100.100.1.254, 234.1.0.48), RP:206.251.17.41, Age:30
(100.100.1.254, 239.1.0.51), RP:206.251.17.41, Age:30
(100.100.1.254, 234.1.0.154), RP:206.251.17.41, Age:30
(100.100.1.254, 236.1.0.1), RP:206.251.17.41, Age:30
(100.100.1.254, 231.1.0.104), RP:206.251.17.41, Age:90
(100.100.1.254, 239.1.0.157), RP:206.251.17.41, Age:30
(100.100.1.254, 236.1.0.107), RP:206.251.17.41, Age:30
(100.100.1.254, 233.1.0.57), RP:206.251.17.41, Age:90
MSDP source active cache
Peer information
Source Active cache
MSDP statistics
Age
Displays...
The total number of entries the cache can hold.
The number of entries the cache currently contains.
The number of additional entries for which the cache has room.
The cache entry number.
The IP address of the multicast source.
The IP multicast group to which the source is sending information.
The RP through which receivers can access the group traffic from the
source
The number of seconds the entry has been in the cache
BigIron RX Series Configuration Guide
53-1002253-01