Displaying 802.1X Information; Displaying 802.1X Configuration Information - Dell PowerConnect B-RX Configuration Manual

33

Displaying 802.1x information

Clearing a dot1x-mac-session for a MAC address
You can clear the dot1x-mac-session for a specified MAC address, so that the Client with that MAC
address can be re-authenticated by the RADIUS server. For example,
BigIron RX# clear dot1x mac-session 00e0.1234.abd4
Syntax: clear dot1x mac-session <mac-address>
Displaying 802.1x information
You can display the following 802.1x-related information:
•
•
•
•
•

Displaying 802.1x configuration information

To display information about the 802.1x configuration on the BigIron RX device, enter the following
command.
BigIron RX# show dot1x
PAE Capability
system-auth-control
Number of ports enabled
re-authentication
global-filter-strict-security: Enable
quiet-period
tx-period
supptimeout
servertimeout
maxreq
re-authperiod
Protocol Version
auth-fail-action
MAC Session Aging
MAC Session Max Age
Maximum Failed Attempts
Syntax: show dot1x
The following table describes the information displayed by the show dot1x command.
982
Information about the 802.1x configuration on the device and on individual ports
Statistics about the EAPOL frames passing through the device
Information about 802.1x-enabled ports dynamically assigned to a VLAN
Information about the user-defined and dynamically applied Mac address and IP ACLs
currently active on the device
Information about the 802.1x multiple client configuration
: Authenticator Only
: Enable
: 25
: Disable
: 60 Seconds
: 30 Seconds
: 30 Seconds
: 30 Seconds
: 3
: 3600 Seconds
: 1
: Block Traffic
: All
: 120 Seconds
: 3
BigIron RX Series Configuration Guide
53-1002253-01