Dell PowerConnect B-RX Configuration Manual page 476

13
Displaying RSTP information
This field...
Designated Cost
Designated Root
Designated Bridge
400
Displays...
The cost to the root bridge as advertised by the designated bridge that is
connected to this port. If the designated bridge is the root bridge itself,
then the cost is 0. The identity of the designated bridge is shown in the
Design Bridge field.
The root bridge as recognized on this port. The value is the same as the
root bridge ID listed in the Root ID field.
The bridge as recognized on this port.
BigIron RX Series Configuration Guide
53-1002253-01